Cyanoacrylic adhesive Tak 3 20Gr Sigill 20010

Description

Manufacturer/distributor:

Manufacturer Code: 20010

Sigill Tak 3 cyanoacrylic adhesive.

Features:
- Tak 3 cyanoacrylic adhesive.
- 20 g tube.
- Hardens by gluing in a few seconds on most non-porous materials such as metals, porcelain and ceramics, glasses and crystals, rubber, leather, fabrics and many materials plastics.
- Pastes in seconds.
- Universal.
- Very strong.
- Just a drop.

Description:
Liquid adhesive ultra-fast setting single component, based on cyano-acrylic copolymers, free from organic solvents. Polymerization by anionic initiation, so that, in most cases, the traces of humidity present on the support to be glued are sufficient to trigger the process.
Use:
Specific for a type of use industrial, capable of guaranteeing excellent results in the bonding of various plastic and/or elastomeric materials (rubbers).
Application:
To obtain maximum performance in terms of adhesion, the surfaces concerned must be dry, clean and degrease; furthermore they must match as perfectly as possible. Apply a thin film of product on one of the surfaces to be glued and immediately join the two parts by exerting light pressure for a few minutes. For gluing large surfaces it is advisable to apply drops in more or less equidistant points.

Sigill Tak 3 cyanoacrylate adhesive.

Features:
- Tak 3 cyanoacrylic adhesive.
- 20 g tube.
- It hardens by gluing in a few seconds on most non-porous materials such as metals, porcelain and ceramics, glasses and crystals, rubber, leather, fabrics and many plastics.
- Pastes in seconds.
- Universal.
- Very strong.
- Just a drop.

Description:
One-component liquid adhesive with ultra-fast setting, based on cyano-acrylic copolymers, free from organic solvents. Polymerization by anionic initiation, so that, in most cases, the traces of humidity present on the support to be glued are sufficient to trigger the process.
Use:
Specific for a type of use industrial, capable of guaranteeing excellent results in the bonding of various plastic and/or elastomeric materials (rubbers).
Application:
To obtain maximum performance in terms of adhesion, the surfaces concerned must be dry, clean and degrease; furthermore they must match as perfectly as possible. Apply a thin film of product on one of the surfaces to be glued and immediately join the two parts by exerting light pressure for a few minutes. For gluing large surfaces it is advisable to apply drops in more or less equidistant points.