FIRE DOT thermal aerosol fire extinguisher - Model F03 - by Universal Motors - QRR0.3/SC-W

THERMAL AEROSOL FIRE extinguisher DOT - F03

ByUNIVERSAL MOTORS

Security always with you
it’s the ideal tool for keeping batteries, inverters, heaters, fuse holders and electrical and electronic equipment in general safe.

You can install it in homes, boats, campers, electrical cabinets and generally anywhere you want to be safer in case of fire.

Easy to install
it is free-standing and requires no cables or batteries! Simply stick it (after removing the protective film on the back) next to the device you want to protect.

AUTOMATIC and QUICK activation at 170 degrees C.
coverage 0.3 m3
dimensions: 85x21 mm
3M adhesive 9448A ultra-strong

fire extinguishing type: A, B, C and E, surface fires.
application temperature: -35+90 degrees centigrade
agent weight: [QRR0.3/SC-W]:10g  [QRR1.0/SC-W]:45g
initial ignition temperature: 170 degrees centigrade

Application
this product è suitable for unmanned, relatively closed power distribution systems of
small, such as electrical distribution boards, switchboards for precision instruments, switchboards
programmable switching, electrical control panels, e.g. in telecommunications, finance
and the chemical industry.
it also offers fire protection in confined spaces in various sectors such as recreational vehicles, trucks, cars, energy, education, etc.

instructions
check that during the installation process, no modifications, perforations or damage to the equipment occur
original. Depending on the technical requirements of each environment, place the device above a subject ignition point
at risk of fire.
before installation, wipe the installation area with a clean cloth to remove dust and stains from the surface, open the package, remove the adhesive protective film on the back and apply the product evenly to the centre or side of the picture
electrical (box) to be protected, pressing firmly.

Duration of service: 5 years

product specifications, models, technical specifications
the self-contained adhesive fire extinguishing system è an innovative, clean and non-polluting high-tech product,
mainly for fires of electrical origin. This product uses flame-retardant multi-component composite polymers and new
cooling materials, and the extinguishing medium released è high efficiency and capable of extinguishing the fire
quickly.

The device is preset inside the electrical equipment to be protected and, when an open flame is detected or the preset ambient temperature is reached, it is automatically activated to extinguish the fire.

È particularly suitable for small unmanned spaces, no power supply, pressure build-up,
pipe network, self-sensing, clean and environmentally friendly, easy to install and maintenance-free. Thanks to its
small size, is not affected by location constraints and can be installed in various spaces or flammable equipment,
this feature compensates for the limitations of existing fire protection products, which are not able to
to extinguish such fire sources.

if the space in the cabinet or at the installation location è is larger   it is advisable to use several products and the maximum protection space can be up to 3 mò.

the device must be stored in a dry, cool, ventilated place, protected from temperatures
high and from direct sunlight, and kept away from heat sources.

Precautions
(1) È Strictly forbidden to store this product near heat sources
(2) È excessive pressure strictly forbidden
(3) È use after expiry date prohibited
(4) In the event of fire, the device will start automatically and can only be touched after it has cooled down.